Free Mother of the Bride SVG

Mother of the Bride in Amatic SC SVG

Mother of the Bride in Amatic SC, as a solid black shape
Mother of the Bride in Amatic SC. The preview is the SVG file itself.

“Mother of the Bride” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 74 mm (3.94 × 2.91 in), scales to any size
Pieces16 separate pieces
Outlines to cut23: 16 outer edges and 7 cut-outs
Cut length1,643 mm at this size
Narrowest part1.2 mm at this size
Nodes609 curve and line segments

Measured from the file. PNG: 2,000 × 1,496 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.74 in (25 × 19 mm)0.3 mm417 mm130Too fine for most machines
2 × 1.48 in (51 × 37 mm)0.61 mm835 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.21 in (76 × 56 mm)0.91 mm1,252 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.95 in (102 × 75 mm)1.2 mm1,669 mm6Vinyl, card and thin sheet
6 × 4.43 in (152 × 112 mm)1.8 mm2,504 mm2Vinyl, card and thin sheet
8 × 5.9 in (203 × 150 mm)2.4 mm3,339 mm1Vinyl, card and thin sheet
12 × 8.86 in (305 × 225 mm)3.7 mm5,008 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mother of the Bride SVG files

← Mother of the Bride in Alfa Slab One All 12 Mother of the Bride designs Mother of the Bride in block capitals →