Free microphone SVG

Microphone on a stage stand SVG

Microphone on a stage stand, as a solid black shape
Microphone on a stage stand. The preview is the SVG file itself.

A microphone clipped to a tall stage stand with a round base, tipped towards the singer, with its cable hanging in a curve down to the floor.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size48 × 100 mm (1.87 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length479 mm at this size
Narrowest part1.9 mm at this size
Nodes59 curve and line segments

Measured from the file. PNG: 992 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.48 × 1 in (12 × 25 mm)0.48 mm122 mm180Too fine for most machines
0.95 × 2 in (24 × 51 mm)0.97 mm243 mm50Fine detail: vinyl and paper only, weed with care
1.43 × 3 in (36 × 76 mm)1.4 mm365 mm21Vinyl, card and thin sheet
1.9 × 4 in (48 × 102 mm)1.9 mm487 mm10Vinyl, card and thin sheet
2.86 × 6 in (73 × 152 mm)2.9 mm730 mm3Vinyl, card and thin sheet
3.81 × 8 in (97 × 203 mm)3.9 mm973 mm3Any material, including 3 mm wood and acrylic
5.71 × 12 in (145 × 305 mm)5.8 mm1,460 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More microphone SVG files

← Microphone icon All 13 microphones Podcast microphone with headphones →