Free microphone SVG

Two crossed microphones with a star SVG

Two crossed microphones with a star. The preview is the SVG file itself.

Two stage microphones crossed at the handle with a star between their heads. For karaoke nights, singing contests and the door of a music room.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	70 × 100 mm (2.75 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	36: 1 outer edge and 35 cut-outs
Cut length	888 mm at this size
Narrowest part	2.4 mm at this size
Nodes	178 curve and line segments

Measured from the file. PNG: 1,419 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.7 × 1 in (18 × 25 mm)	0.61 mm	226 mm	130	Fine detail: vinyl and paper only, weed with care
1.4 × 2 in (35 × 51 mm)	1.2 mm	451 mm	35	Vinyl, card and thin sheet
2.09 × 3 in (53 × 76 mm)	1.8 mm	677 mm	15	Vinyl, card and thin sheet
2.79 × 4 in (71 × 102 mm)	2.4 mm	902 mm	8	Vinyl, card and thin sheet
4.19 × 6 in (106 × 152 mm)	3.7 mm	1,353 mm	2	Any material, including 3 mm wood and acrylic
5.58 × 8 in (142 × 203 mm)	4.9 mm	1,804 mm	2	Any material, including 3 mm wood and acrylic
8.38 × 12 in (213 × 305 mm)	7.3 mm	2,707 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More microphone SVG files

← Podcast microphone with headphones All 13 microphones Singing microphone with music notes →