Free microphone SVG

Podcast microphone with headphones SVG

Podcast microphone with headphones, as a solid black shape
Podcast microphone with headphones. The preview is the SVG file itself.

The recording microphone with a pair of headphones hung over it: the band rests on top of the capsule and a padded cup hangs at each side. An emblem for a podcast, a radio club or a home studio.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 80 mm (3.94 × 3.14 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length793 mm at this size
Narrowest part5.9 mm at this size
Nodes83 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,612 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)1.5 mm201 mm120Vinyl, card and thin sheet
2 × 1.6 in (51 × 41 mm)3 mm403 mm30Vinyl, card and thin sheet
3 × 2.39 in (76 × 61 mm)4.5 mm604 mm12Any material, including 3 mm wood and acrylic
4 × 3.19 in (102 × 81 mm)6 mm806 mm6Any material, including 3 mm wood and acrylic
6 × 4.79 in (152 × 122 mm)9 mm1,209 mm2Any material, including 3 mm wood and acrylic
8 × 6.38 in (203 × 162 mm)12 mm1,611 mm1Any material, including 3 mm wood and acrylic
12 × 9.58 in (305 × 243 mm)18 mm2,417 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More microphone SVG files

← Microphone on a stage stand All 13 microphones Two crossed microphones with a star →