Free megaphone SVG

Megaphone with a bow SVG

Megaphone with a bow, as a solid black shape — Megaphone with a bow. The preview is the SVG file itself.

The megaphone standing on its bell with a big cheer bow tied below the collar, its tails falling over the top band.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	66 × 100 mm (2.61 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	781 mm at this size
Narrowest part	2.6 mm at this size
Nodes	187 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,350 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.66 × 1 in (17 × 25 mm)	0.66 mm	198 mm	140	Fine detail: vinyl and paper only, weed with care
1.32 × 2 in (34 × 51 mm)	1.3 mm	397 mm	40	Vinyl, card and thin sheet
1.99 × 3 in (50 × 76 mm)	2 mm	595 mm	15	Vinyl, card and thin sheet
2.65 × 4 in (67 × 102 mm)	2.6 mm	793 mm	8	Vinyl, card and thin sheet
3.97 × 6 in (101 × 152 mm)	4 mm	1,190 mm	2	Any material, including 3 mm wood and acrylic
5.3 × 8 in (135 × 203 mm)	5.3 mm	1,587 mm	2	Any material, including 3 mm wood and acrylic
7.94 × 12 in (202 × 305 mm)	7.9 mm	2,380 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More megaphone SVG files

← Pair of pom poms for a megaphone set All 15 megaphones Megaphone with stars →