Free megaphone SVG

Split megaphone for a name SVG

Split megaphone for a name, as a solid black shape — Split megaphone for a name. The preview is the SVG file itself.

The megaphone cut in two along its length with a clear band between the halves, where a name goes. It comes as two pieces: the top with the handle, and the bottom.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 85 mm (3.94 × 3.34 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	3: 2 outer edges and 1 cut-out
Cut length	860 mm at this size
Narrowest part	2.1 mm at this size
Nodes	84 curve and line segments

Measured from the file. PNG: 2,000 × 1,710 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.85 in (25 × 22 mm)	0.53 mm	218 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.7 in (51 × 43 mm)	1.1 mm	437 mm	30	Vinyl, card and thin sheet
3 × 2.55 in (76 × 65 mm)	1.6 mm	655 mm	12	Vinyl, card and thin sheet
4 × 3.4 in (102 × 86 mm)	2.1 mm	874 mm	6	Vinyl, card and thin sheet
6 × 5.09 in (152 × 129 mm)	3.2 mm	1,311 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.79 in (203 × 173 mm)	4.3 mm	1,748 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.19 in (305 × 259 mm)	6.4 mm	2,621 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More megaphone SVG files

← Megaphone with a heart All 15 megaphones Megaphone monogram frame →