Free mask SVG

Comedy and tragedy in one mask SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Comedy and tragedy in one mask, as a solid black shape
Comedy and tragedy in one mask. The preview is the SVG file itself.

One stage mask split down the middle with the halves slipped apart: the left half laughs and sits higher, the right half weeps and sits lower. Two small bridges across the gap keep it in one piece.

What is in the file

Size72 × 100 mm (2.84 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length807 mm at this size
Narrowest part1.8 mm at this size
Nodes166 curve and line segments

Measured from the file. PNG: 1,465 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.46 mm205 mm130Too fine for most machines
1.44 × 2 in (37 × 51 mm)0.91 mm410 mm35Fine detail: vinyl and paper only, weed with care
2.17 × 3 in (55 × 76 mm)1.4 mm615 mm15Vinyl, card and thin sheet
2.89 × 4 in (73 × 102 mm)1.8 mm820 mm6Vinyl, card and thin sheet
4.33 × 6 in (110 × 152 mm)2.7 mm1,230 mm2Vinyl, card and thin sheet
5.78 × 8 in (147 × 203 mm)3.7 mm1,640 mm2Any material, including 3 mm wood and acrylic
8.66 × 12 in (220 × 305 mm)5.5 mm2,460 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mask SVG files

← Tragedy mask All 15 masks Theatre masks under a stage curtain →