Free mask SVG

Fox mask for children SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fox mask for children, as a solid black shape
Fox mask for children. The preview is the SVG file itself.

A fox face to wear: tall ears, tufted cheeks and a long muzzle that ends in a round nose, with a line marking each pale cheek, two eye holes and a hole at each edge for elastic. One piece.

What is in the file

Size100 × 95 mm (3.94 × 3.75 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length772 mm at this size
Narrowest part2.6 mm at this size
Nodes139 curve and line segments
SymmetryMirror
Also found asKids masks SVG

Measured from the file. PNG: 2,000 × 1,910 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)0.66 mm196 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.91 in (51 × 48 mm)1.3 mm392 mm25Vinyl, card and thin sheet
3 × 2.86 in (76 × 73 mm)2 mm588 mm9Vinyl, card and thin sheet
4 × 3.81 in (102 × 97 mm)2.6 mm784 mm6Vinyl, card and thin sheet
6 × 5.72 in (152 × 145 mm)4 mm1,177 mm2Any material, including 3 mm wood and acrylic
8 × 7.62 in (203 × 194 mm)5.3 mm1,569 mm1Any material, including 3 mm wood and acrylic
12 × 11.44 in (305 × 290 mm)7.9 mm2,353 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mask SVG files

← Cat mask for children All 15 masks Bear mask for children →