Free mask SVG

Gas mask SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Gas mask, as a solid black shape — Gas mask. The preview is the SVG file itself.

A gas mask from the front: two round lenses, a round filter on the chin with three slots across it, a valve on each cheek and four straps. For post-apocalyptic costumes, paintball teams and warning signs.

What is in the file

Size	100 × 84 mm (3.94 × 3.3 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	1,010 mm at this size
Narrowest part	2.9 mm at this size
Nodes	270 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,688 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.84 in (25 × 21 mm)	0.74 mm	257 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.68 in (51 × 43 mm)	1.5 mm	513 mm	30	Vinyl, card and thin sheet
3 × 2.51 in (76 × 64 mm)	2.2 mm	770 mm	12	Vinyl, card and thin sheet
4 × 3.35 in (102 × 85 mm)	2.9 mm	1,026 mm	6	Vinyl, card and thin sheet
6 × 5.03 in (152 × 128 mm)	4.4 mm	1,539 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.7 in (203 × 170 mm)	5.9 mm	2,052 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.06 in (305 × 255 mm)	8.8 mm	3,078 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mask SVG files

← Sleep mask with lashes All 15 masks Ski mask →