Free mask SVG

Hero mask with a star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hero mask with a star. The preview is the SVG file itself.

A pointed eye mask of the kind a comic book hero wears: swept-up outer corners, angular eye holes, a star on the brow and a hole at each side for elastic. No emblem of any real character.

What is in the file

Size	100 × 36 mm (3.94 × 1.43 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	426 mm at this size
Narrowest part	2.8 mm at this size
Nodes	89 curve and line segments
Symmetry	Mirror
Also found as	Superhero mask SVG

Measured from the file. PNG: 2,000 × 773 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.36 in (25 × 9 mm)	0.71 mm	108 mm	210	Fine detail: vinyl and paper only, weed with care
2 × 0.72 in (51 × 18 mm)	1.4 mm	216 mm	65	Vinyl, card and thin sheet
3 × 1.09 in (76 × 28 mm)	2.1 mm	325 mm	27	Vinyl, card and thin sheet
4 × 1.45 in (102 × 37 mm)	2.8 mm	433 mm	14	Vinyl, card and thin sheet
6 × 2.17 in (152 × 55 mm)	4.3 mm	649 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.9 in (203 × 74 mm)	5.7 mm	866 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.34 in (305 × 110 mm)	8.5 mm	1,298 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mask SVG files

← Blank mask template to decorate All 15 masks Sleep mask with lashes →