Free Mardi Gras mask SVG

Mask on a stick SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mask on a stick, as a solid black shape
Mask on a stick. The preview is the SVG file itself.

A cat-eye mask held on a slim stick at one side, with a ribbon curling down from the join and studs along the brow. For photo booth props, invitations and place cards.

What is in the file

Size100 × 80 mm (3.94 × 3.15 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length642 mm at this size
Narrowest part1.3 mm at this size
Nodes199 curve and line segments

Measured from the file. PNG: 2,000 × 1,615 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)0.33 mm163 mm120Too fine for most machines
2 × 1.6 in (51 × 41 mm)0.66 mm326 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.4 in (76 × 61 mm)0.99 mm489 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.2 in (102 × 81 mm)1.3 mm652 mm6Vinyl, card and thin sheet
6 × 4.8 in (152 × 122 mm)2 mm978 mm2Vinyl, card and thin sheet
8 × 6.4 in (203 × 163 mm)2.6 mm1,305 mm1Vinyl, card and thin sheet
12 × 9.6 in (305 × 244 mm)4 mm1,957 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mardi Gras mask SVG files

← Simple eye mask silhouette All 13 Mardi Gras masks Venetian mask with scrollwork →