Free Mardi Gras mask SVG

Mardi Gras mask with a fleur-de-lis SVG

Mardi Gras mask with a fleur-de-lis, as a solid black shape
Mardi Gras mask with a fleur-de-lis. The preview is the SVG file itself.

A mask with a fleur-de-lis standing on the brow between two short feathers, the sign of New Orleans. Studs run over each eye. Exactly symmetrical, for parade throws and party banners.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 61 mm (3.94 × 2.4 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length826 mm at this size
Narrowest part1.1 mm at this size
Nodes296 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,250 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.28 mm210 mm150Too fine for most machines
2 × 1.22 in (51 × 31 mm)0.56 mm420 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.83 in (76 × 46 mm)0.84 mm629 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.44 in (102 × 62 mm)1.1 mm839 mm8Vinyl, card and thin sheet
6 × 3.66 in (152 × 93 mm)1.7 mm1,259 mm3Vinyl, card and thin sheet
8 × 4.88 in (203 × 124 mm)2.2 mm1,678 mm2Vinyl, card and thin sheet
12 × 7.32 in (305 × 186 mm)3.4 mm2,518 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mardi Gras mask SVG files

← Mardi Gras mask with a jester hat All 13 Mardi Gras masks Mardi Gras mask with a crown →