Free Mardi Gras mask SVG

Mardi Gras mask with stars and ribbon ties SVG

Mardi Gras mask with stars and ribbon ties, as a solid black shape — Mardi Gras mask with stars and ribbon ties. The preview is the SVG file itself.

A cat-eye mask with a star cut at each temple, studs over the brows and a pair of ribbon ties flying from each side, as if it had just been taken off.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 41 mm (3.94 × 1.6 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	561 mm at this size
Narrowest part	1.7 mm at this size
Nodes	227 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 860 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.41 in (25 × 10 mm)	0.43 mm	142 mm	200	Too fine for most machines
2 × 0.81 in (51 × 21 mm)	0.86 mm	285 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.22 in (76 × 31 mm)	1.3 mm	427 mm	24	Vinyl, card and thin sheet
4 × 1.63 in (102 × 41 mm)	1.7 mm	570 mm	12	Vinyl, card and thin sheet
6 × 2.44 in (152 × 62 mm)	2.6 mm	855 mm	4	Vinyl, card and thin sheet
8 × 3.26 in (203 × 83 mm)	3.5 mm	1,140 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.88 in (305 × 124 mm)	5.2 mm	1,710 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mardi Gras mask SVG files

← Butterfly masquerade mask All 13 Mardi Gras masks Mardi Gras mask outline →