Free Mama SVG

Mama in Amatic SC SVG

Mama in Amatic SC, as a solid black shape — Mama in Amatic SC. The preview is the SVG file itself.

“Mama” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 54 mm (3.94 × 2.12 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	6: 4 outer edges and 2 cut-outs
Cut length	993 mm at this size
Narrowest part	3.3 mm at this size
Nodes	249 curve and line segments

Measured from the file. PNG: 2,000 × 1,112 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.54 in (25 × 14 mm)	0.84 mm	252 mm	160	Fine detail: vinyl and paper only, weed with care
2 × 1.08 in (51 × 27 mm)	1.7 mm	504 mm	45	Vinyl, card and thin sheet
3 × 1.61 in (76 × 41 mm)	2.5 mm	757 mm	18	Vinyl, card and thin sheet
4 × 2.15 in (102 × 55 mm)	3.4 mm	1,009 mm	10	Any material, including 3 mm wood and acrylic
6 × 3.23 in (152 × 82 mm)	5 mm	1,513 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.3 in (203 × 109 mm)	6.7 mm	2,018 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.46 in (305 × 164 mm)	10 mm	3,027 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama SVG files

← Mama in Alfa Slab One All 12 Mama designs Mama in block capitals →