Free Mama SVG

Mama with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama with a swash underline, as a solid black shape
Mama with a swash underline. The preview is the SVG file itself.

“Mama” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 36 mm (3.94 × 1.41 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length705 mm at this size
Narrowest part2 mm at this size
Nodes199 curve and line segments

Measured from the file. PNG: 2,000 × 767 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.36 in (25 × 9 mm)0.51 mm179 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.72 in (51 × 18 mm)1 mm358 mm65Vinyl, card and thin sheet
3 × 1.08 in (76 × 27 mm)1.5 mm537 mm27Vinyl, card and thin sheet
4 × 1.44 in (102 × 36 mm)2 mm716 mm14Vinyl, card and thin sheet
6 × 2.15 in (152 × 55 mm)3 mm1,074 mm5Any material, including 3 mm wood and acrylic
8 × 2.87 in (203 × 73 mm)4.1 mm1,433 mm3Any material, including 3 mm wood and acrylic
12 × 4.31 in (305 × 109 mm)6.1 mm2,149 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama SVG files

← Mama in block capitals All 13 Mama designs Mama with hearts →