Free Mama SVG

Mama in block capitals SVG

Mama in block capitals, as a solid black shape — Mama in block capitals. The preview is the SVG file itself.

“MAMA” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 38 mm (3.94 × 1.51 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	6: 4 outer edges and 2 cut-outs
Cut length	892 mm at this size
Narrowest part	3.9 mm at this size
Nodes	58 curve and line segments

Measured from the file. PNG: 2,000 × 815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.38 in (25 × 10 mm)	0.99 mm	227 mm	200	Fine detail: vinyl and paper only, weed with care
2 × 0.77 in (51 × 20 mm)	2 mm	453 mm	60	Vinyl, card and thin sheet
3 × 1.15 in (76 × 29 mm)	3 mm	680 mm	27	Vinyl, card and thin sheet
4 × 1.54 in (102 × 39 mm)	4 mm	906 mm	14	Any material, including 3 mm wood and acrylic
6 × 2.3 in (152 × 59 mm)	5.9 mm	1,359 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.07 in (203 × 78 mm)	7.9 mm	1,813 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.61 in (305 × 117 mm)	12 mm	2,719 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama SVG files

← Mama in Amatic SC All 12 Mama designs Mama with a swash underline →