Free lotus SVG

Lotus bud and leaf SVG

Lotus bud and leaf, as a solid black shape
Lotus bud and leaf. The preview is the SVG file itself.

A closed bud on a tall curved stem beside a leaf seen edge on, the two stems meeting at the foot. Pairs well with an open flower.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size65 × 100 mm (2.54 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length440 mm at this size
Narrowest part2.3 mm at this size
Nodes66 curve and line segments

Measured from the file. PNG: 1,319 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.65 × 1 in (16 × 25 mm)0.58 mm112 mm140Fine detail: vinyl and paper only, weed with care
1.29 × 2 in (33 × 51 mm)1.2 mm224 mm40Vinyl, card and thin sheet
1.94 × 3 in (49 × 76 mm)1.8 mm335 mm15Vinyl, card and thin sheet
2.58 × 4 in (66 × 102 mm)2.3 mm447 mm8Vinyl, card and thin sheet
3.88 × 6 in (98 × 152 mm)3.5 mm671 mm2Any material, including 3 mm wood and acrylic
5.17 × 8 in (131 × 203 mm)4.7 mm894 mm2Any material, including 3 mm wood and acrylic
7.75 × 12 in (197 × 305 mm)7 mm1,341 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lotus SVG files

← Lotus in a ring All 16 lotus flowers Lotus with bud and pads →