Free lotus SVG

Layered lotus in four colours SVG

Layered lotus in four colours, in layered colours
Layered lotus in four colours. The preview is the SVG file itself.

Four layers to stack: a green pad, then outer, middle and front petals from deep pink to pale. Each layer is one piece with a wide foot to glue.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 72 mm (3.94 × 2.83 in), scales to any size
Pieces4 separate pieces
Outlines to cut4 outlines
Cut length893 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes123 curve and line segments
SymmetryMirror
Layers4: pad, outer petals, middle petals and front petals

Measured from the file. PNG: 2,000 × 1,462 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)Over 1.5 mm227 mm130Vinyl, card and thin sheet
2 × 1.44 in (51 × 37 mm)Over 3 mm454 mm35Any material, including 3 mm wood and acrylic
3 × 2.16 in (76 × 55 mm)Over 4.6 mm680 mm15Any material, including 3 mm wood and acrylic
4 × 2.88 in (102 × 73 mm)Over 6.1 mm907 mm6Any material, including 3 mm wood and acrylic
6 × 4.32 in (152 × 110 mm)Over 9.1 mm1,361 mm2Any material, including 3 mm wood and acrylic
8 × 5.76 in (203 × 146 mm)Over 12 mm1,815 mm2Any material, including 3 mm wood and acrylic
12 × 8.64 in (305 × 219 mm)Over 18 mm2,722 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lotus SVG files

← Lotus seed pod All 16 lotus flowers Lotus flower with seven petals →