Free lipstick SVG

Lipstick with a kiss print SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lipstick with a kiss print, as a solid black shape
Lipstick with a kiss print. The preview is the SVG file itself.

An upright lipstick beside the print it leaves: a kiss with the lips apart and creases cut into each. Three separate pieces by design.

What is in the file

Size100 × 97 mm (3.94 × 3.81 in), scales to any size
Pieces3 separate pieces
Outlines to cut18: 3 outer edges and 15 cut-outs
Cut length803 mm at this size
Narrowest part1 mm at this size
Nodes235 curve and line segments
Also found asLips with lipstick SVG

Measured from the file. PNG: 2,000 × 1,937 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.25 mm204 mm100Too fine for most machines
2 × 1.93 in (51 × 49 mm)0.51 mm408 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.9 in (76 × 74 mm)0.76 mm612 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.87 in (102 × 98 mm)1 mm816 mm6Vinyl, card and thin sheet
6 × 5.8 in (152 × 147 mm)1.5 mm1,224 mm2Vinyl, card and thin sheet
8 × 7.74 in (203 × 196 mm)2 mm1,632 mm1Vinyl, card and thin sheet
12 × 11.6 in (305 × 295 mm)3 mm2,448 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lipstick SVG files

← Lips and lipstick All 13 lipsticks Lipstick drawing a heart →