Free lipstick SVG

Leopard print lipstick SVG

Leopard print lipstick, as a solid black shape
Leopard print lipstick. The preview is the SVG file itself.

An upright lipstick with a wider case covered in leopard spots, trimmed to leave a solid rim, under a plain tube and a domed bullet. Put gold behind the holes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size37 × 100 mm (1.47 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut23: 1 outer edge and 22 cut-outs
Cut length622 mm at this size
Narrowest part1.7 mm at this size
Nodes233 curve and line segments

Measured from the file. PNG: 794 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.37 × 1 in (9 × 25 mm)0.43 mm158 mm210Too fine for most machines
0.75 × 2 in (19 × 51 mm)0.86 mm316 mm60Fine detail: vinyl and paper only, weed with care
1.12 × 3 in (28 × 76 mm)1.3 mm474 mm27Vinyl, card and thin sheet
1.49 × 4 in (38 × 102 mm)1.7 mm632 mm14Vinyl, card and thin sheet
2.24 × 6 in (57 × 152 mm)2.6 mm948 mm5Vinyl, card and thin sheet
2.98 × 8 in (76 × 203 mm)3.5 mm1,264 mm3Any material, including 3 mm wood and acrylic
4.48 × 12 in (114 × 305 mm)5.2 mm1,896 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lipstick SVG files

← Lipstick and lip gloss All 13 lipsticks Lipstick and make-up set →