Free librarian SVG

Librarian shh finger to the lips SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Librarian shh finger to the lips, as a solid black shape
Librarian shh finger to the lips. The preview is the SVG file itself.

The sign every reading room knows: a forefinger held upright across closed lips, with the hand folded below. A thin gap marks the finger where it crosses the lips.

What is in the file

Size70 × 100 mm (2.74 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length677 mm at this size
Narrowest part2.6 mm at this size
Nodes116 curve and line segments

Measured from the file. PNG: 1,413 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.66 mm172 mm130Fine detail: vinyl and paper only, weed with care
1.39 × 2 in (35 × 51 mm)1.3 mm344 mm35Vinyl, card and thin sheet
2.09 × 3 in (53 × 76 mm)2 mm516 mm15Vinyl, card and thin sheet
2.78 × 4 in (71 × 102 mm)2.6 mm688 mm8Vinyl, card and thin sheet
4.17 × 6 in (106 × 152 mm)4 mm1,032 mm2Any material, including 3 mm wood and acrylic
5.56 × 8 in (141 × 203 mm)5.3 mm1,376 mm2Any material, including 3 mm wood and acrylic
8.34 × 12 in (212 × 305 mm)7.9 mm2,063 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More librarian SVG files

← Librarian’s bookshelf with a ladder All 14 librarians Librarian in a bun and glasses →