Free librarian SVG

Librarian bookplate frame for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Librarian bookplate frame for a name, as a solid black shape
Librarian bookplate frame for a name. The preview is the SVG file itself.

A bookplate: a tall label with ticket corners, an open book and two sprigs in the header and the middle left clear. Add a name or initials to mark whose book it is.

What is in the file

Size80 × 100 mm (3.15 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length890 mm at this size
Narrowest part1.1 mm at this size
Nodes93 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,615 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.28 mm226 mm120Too fine for most machines
1.6 × 2 in (41 × 51 mm)0.56 mm452 mm30Fine detail: vinyl and paper only, weed with care
2.4 × 3 in (61 × 76 mm)0.84 mm678 mm12Fine detail: vinyl and paper only, weed with care
3.2 × 4 in (81 × 102 mm)1.1 mm904 mm6Vinyl, card and thin sheet
4.8 × 6 in (122 × 152 mm)1.7 mm1,356 mm2Vinyl, card and thin sheet
6.4 × 8 in (163 × 203 mm)2.2 mm1,808 mm1Vinyl, card and thin sheet
9.6 × 12 in (244 × 305 mm)3.4 mm2,713 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More librarian SVG files

← Librarian’s cat on a pile of books All 14 librarians Librarian book cart outline →