Free lavender SVG

Lavender outline SVG

Lavender outline, drawn as a line — Lavender outline. The preview is the SVG file itself.

The sprig as a line drawing: a stem 2 mm wide, open buds in pairs up the spike and two outlined leaves. For colouring pages, embroidery patterns, foil and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	29 × 100 mm (1.12 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	20: 1 outer edge and 19 cut-outs
Cut length	637 mm at this size
Narrowest part	1.7 mm at this size
Nodes	195 curve and line segments

Measured from the file. PNG: 625 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.29 × 1 in (7 × 25 mm)	0.43 mm	162 mm	250	Too fine for most machines
0.57 × 2 in (14 × 51 mm)	0.86 mm	324 mm	75	Fine detail: vinyl and paper only, weed with care
0.86 × 3 in (22 × 76 mm)	1.3 mm	485 mm	33	Vinyl, card and thin sheet
1.14 × 4 in (29 × 102 mm)	1.7 mm	647 mm	18	Vinyl, card and thin sheet
1.71 × 6 in (43 × 152 mm)	2.6 mm	971 mm	6	Vinyl, card and thin sheet
2.28 × 8 in (58 × 203 mm)	3.5 mm	1,294 mm	4	Any material, including 3 mm wood and acrylic
3.42 × 12 in (87 × 305 mm)	5.2 mm	1,942 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lavender SVG files

← Arching lavender sprig All 12 lavender sprigs Layered lavender in three colours →