Free lavender SVG

Layered lavender in three colours SVG

Layered lavender in three colours, in layered colours — Layered lavender in three colours. The preview is the SVG file itself.

Three layers to stack: three green stems with their leaves, the purple flower spikes, and a lilac bow to tie them. Cut the buds in two shades of purple for more depth.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	50 × 100 mm (1.98 × 3.94 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	15: 11 outer edges and 4 cut-outs
Cut length	1,398 mm at this size
Narrowest part	2.8 mm at this size
Nodes	401 curve and line segments
Layers	3: stems, flowers and bow

Measured from the file. PNG: 1,046 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.5 × 1 in (13 × 25 mm)	0.71 mm	355 mm	170	Fine detail: vinyl and paper only, weed with care
1.01 × 2 in (26 × 51 mm)	1.4 mm	710 mm	50	Vinyl, card and thin sheet
1.51 × 3 in (38 × 76 mm)	2.1 mm	1,065 mm	21	Vinyl, card and thin sheet
2.02 × 4 in (51 × 102 mm)	2.8 mm	1,420 mm	10	Vinyl, card and thin sheet
3.02 × 6 in (77 × 152 mm)	4.3 mm	2,131 mm	3	Any material, including 3 mm wood and acrylic
4.03 × 8 in (102 × 203 mm)	5.7 mm	2,841 mm	2	Any material, including 3 mm wood and acrylic
6.05 × 12 in (154 × 305 mm)	8.5 mm	4,261 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lavender SVG files

← Lavender outline All 12 lavender sprigs Lavender sprig →