Free ladybug SVG

Ladybug with a looping trail SVG

Ladybug with a looping trail, as a solid black shape — Ladybug with a looping trail. The preview is the SVG file itself.

A ladybug at the end of a dashed loop the loop, as if it had just flown in. The dashes are loose pieces on purpose, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 73 mm (3.94 × 2.87 in), scales to any size
Pieces	19 separate pieces
Outlines to cut	26: 19 outer edges and 7 cut-outs
Cut length	750 mm at this size
Narrowest part	1.7 mm at this size
Nodes	329 curve and line segments

Measured from the file. PNG: 2,000 × 1,479 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 19 mm)	0.43 mm	191 mm	130	Too fine for most machines
2 × 1.46 in (51 × 37 mm)	0.86 mm	381 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.19 in (76 × 56 mm)	1.3 mm	571 mm	15	Vinyl, card and thin sheet
4 × 2.92 in (102 × 74 mm)	1.7 mm	762 mm	6	Vinyl, card and thin sheet
6 × 4.37 in (152 × 111 mm)	2.6 mm	1,143 mm	2	Vinyl, card and thin sheet
8 × 5.83 in (203 × 148 mm)	3.5 mm	1,524 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.75 in (305 × 222 mm)	5.2 mm	2,286 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladybug SVG files

← Ladybug in flight All 12 ladybugs Cute ladybug with a smile →