Free ladybug SVG

Ladybug outline SVG

Ladybug outline, drawn as a line
Ladybug outline. The preview is the SVG file itself.

The ladybug as an even line, with its spots drawn as rings that touch the centre line or the edge so the whole drawing stays in one piece. For colouring pages and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 98 mm (3.94 × 3.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length1,330 mm at this size
Narrowest part2.2 mm at this size
Nodes199 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,969 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.56 mm338 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.97 in (51 × 50 mm)1.1 mm676 mm25Vinyl, card and thin sheet
3 × 2.95 in (76 × 75 mm)1.7 mm1,013 mm9Vinyl, card and thin sheet
4 × 3.94 in (102 × 100 mm)2.2 mm1,351 mm4Vinyl, card and thin sheet
6 × 5.9 in (152 × 150 mm)3.4 mm2,027 mm1Any material, including 3 mm wood and acrylic
8 × 7.87 in (203 × 200 mm)4.5 mm2,703 mm1Any material, including 3 mm wood and acrylic
12 × 11.81 in (305 × 300 mm)6.7 mm4,054 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladybug SVG files

← Three ladybugs All 12 ladybugs Layered ladybug in three colours →