Free kayak SVG

Canoe paddle SVG

Canoe paddle, as a solid black shape
Canoe paddle. The preview is the SVG file itself.

A single wooden canoe paddle set on a slant: a beaver-tail blade with a ridge line down the middle, a slim shaft and a shaped grip at the top. For camp signs and cabin walls.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size68 × 100 mm (2.69 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length310 mm at this size
Narrowest part4 mm at this size
Nodes23 curve and line segments

Measured from the file. PNG: 1,392 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.68 × 1 in (17 × 25 mm)1 mm79 mm130Vinyl, card and thin sheet
1.37 × 2 in (35 × 51 mm)2 mm157 mm35Vinyl, card and thin sheet
2.05 × 3 in (52 × 76 mm)3 mm236 mm15Any material, including 3 mm wood and acrylic
2.74 × 4 in (69 × 102 mm)4.1 mm315 mm8Any material, including 3 mm wood and acrylic
4.1 × 6 in (104 × 152 mm)6.1 mm472 mm2Any material, including 3 mm wood and acrylic
5.47 × 8 in (139 × 203 mm)8.1 mm630 mm2Any material, including 3 mm wood and acrylic
8.21 × 12 in (208 × 305 mm)12 mm945 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kayak SVG files

← Canoe with a paddle All 14 kayaks Crossed canoe paddles →