Free kayak SVG

Kayak outline SVG

Kayak outline, drawn as a line — Kayak outline. The preview is the SVG file itself.

The kayak from above as one joined line: the hull, the cockpit, the hatch and the bungee cross on the fore deck. For colouring pages, trip maps, foil and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 20 mm (3.94 × 0.79 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	643 mm at this size
Narrowest part	1.3 mm at this size
Nodes	96 curve and line segments

Measured from the file. PNG: 2,000 × 462 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.2 in (25 × 5 mm)	0.33 mm	163 mm	300	Too fine for most machines
2 × 0.4 in (51 × 10 mm)	0.66 mm	327 mm	100	Fine detail: vinyl and paper only, weed with care
3 × 0.6 in (76 × 15 mm)	0.99 mm	490 mm	45	Fine detail: vinyl and paper only, weed with care
4 × 0.8 in (102 × 20 mm)	1.3 mm	653 mm	24	Vinyl, card and thin sheet
6 × 1.2 in (152 × 30 mm)	2 mm	980 mm	8	Vinyl, card and thin sheet
8 × 1.6 in (203 × 41 mm)	2.6 mm	1,307 mm	6	Vinyl, card and thin sheet
12 × 2.4 in (305 × 61 mm)	4 mm	1,960 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More kayak SVG files

← Paddle board with a paddle All 14 kayaks Kayak paddle monogram frame →