Free karate SVG

Karate sparring pair SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Karate sparring pair, as a solid black shape
Karate sparring pair. The preview is the SVG file itself.

Two fighters on a strip of floor: the one on the left throws a front kick while the one on the right steps back with a rising block. The floor joins them, so the pair lifts as one piece.

What is in the file

Size100 × 72 mm (3.94 × 2.82 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length676 mm at this size
Narrowest part3.5 mm at this size
Nodes302 curve and line segments

Measured from the file. PNG: 2,000 × 1,454 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.89 mm172 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.43 in (51 × 36 mm)1.8 mm343 mm35Vinyl, card and thin sheet
3 × 2.15 in (76 × 55 mm)2.7 mm515 mm15Vinyl, card and thin sheet
4 × 2.86 in (102 × 73 mm)3.6 mm687 mm6Any material, including 3 mm wood and acrylic
6 × 4.3 in (152 × 109 mm)5.3 mm1,030 mm2Any material, including 3 mm wood and acrylic
8 × 5.73 in (203 × 145 mm)7.1 mm1,374 mm2Any material, including 3 mm wood and acrylic
12 × 8.59 in (305 × 218 mm)11 mm2,060 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More karate SVG files

← Karate bow All 13 karate designs Karate student standing ready →