Free karate SVG

Karate kick outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Karate kick outline, drawn as a line
Karate kick outline. The preview is the SVG file itself.

The side kick as an even line round the whole figure: head, guard, jacket, belt ends, trousers and bare feet. For colouring pages, foil and pen plotters, or as a border to lay round the solid kick.

What is in the file

Size94 × 100 mm (3.7 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length834 mm at this size
Narrowest part2.9 mm at this size
Nodes346 curve and line segments

Measured from the file. PNG: 1,885 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.74 mm212 mm100Fine detail: vinyl and paper only, weed with care
1.88 × 2 in (48 × 51 mm)1.5 mm424 mm25Vinyl, card and thin sheet
2.82 × 3 in (72 × 76 mm)2.2 mm636 mm12Vinyl, card and thin sheet
3.76 × 4 in (96 × 102 mm)2.9 mm847 mm6Vinyl, card and thin sheet
5.64 × 6 in (143 × 152 mm)4.4 mm1,271 mm2Any material, including 3 mm wood and acrylic
7.52 × 8 in (191 × 203 mm)5.9 mm1,695 mm1Any material, including 3 mm wood and acrylic
11.28 × 12 in (287 × 305 mm)8.8 mm2,542 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More karate SVG files

← Karate belt monogram frame All 13 karate designs Layered karate punch in four colours →