Free Just Married SVG

Just Married in Amatic SC SVG

Just Married in Amatic SC, as a solid black shape
Just Married in Amatic SC. The preview is the SVG file itself.

“Just Married” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
Pieces11 separate pieces
Outlines to cut15: 11 outer edges and 4 cut-outs
Cut length1,371 mm at this size
Narrowest part1.9 mm at this size
Nodes459 curve and line segments

Measured from the file. PNG: 2,000 × 1,813 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.48 mm348 mm110Too fine for most machines
2 × 1.81 in (51 × 46 mm)0.97 mm696 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.71 in (76 × 69 mm)1.4 mm1,045 mm12Vinyl, card and thin sheet
4 × 3.61 in (102 × 92 mm)1.9 mm1,393 mm6Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)2.9 mm2,089 mm2Vinyl, card and thin sheet
8 × 7.22 in (203 × 183 mm)3.9 mm2,786 mm1Any material, including 3 mm wood and acrylic
12 × 10.84 in (305 × 275 mm)5.8 mm4,179 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Just Married SVG files

← Just Married in Alfa Slab One All 12 Just Married designs Just Married in block capitals →