Free Just Married SVG

Just Married stencil plate SVG

Just Married stencil plate, as a solid black shape — Just Married stencil plate. The preview is the SVG file itself.

A rounded plate with “JUST MARRIED” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 78 mm (3.94 × 3.08 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,402 mm at this size
Narrowest part	1.1 mm at this size
Nodes	267 curve and line segments

Measured from the file. PNG: 2,000 × 1,583 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.78 in (25 × 20 mm)	0.28 mm	356 mm	120	Too fine for most machines
2 × 1.57 in (51 × 40 mm)	0.56 mm	712 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.35 in (76 × 60 mm)	0.84 mm	1,068 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.13 in (102 × 80 mm)	1.1 mm	1,424 mm	6	Vinyl, card and thin sheet
6 × 4.7 in (152 × 119 mm)	1.7 mm	2,137 mm	2	Vinyl, card and thin sheet
8 × 6.26 in (203 × 159 mm)	2.2 mm	2,849 mm	1	Vinyl, card and thin sheet
12 × 9.4 in (305 × 239 mm)	3.4 mm	4,273 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Just Married SVG files

← Just Married outline lettering All 12 Just Married designs Just Married with a drop shadow →