Free Just Married SVG

Just Married with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Just Married with hearts, as a solid black shape
Just Married with hearts. The preview is the SVG file itself.

“Just Married” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 98 mm (3.94 × 3.87 in), scales to any size
Pieces13 separate pieces
Outlines to cut17: 13 outer edges and 4 cut-outs
Cut length1,145 mm at this size
Narrowest part1.1 mm at this size
Nodes289 curve and line segments

Measured from the file. PNG: 2,000 × 1,965 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.28 mm291 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.56 mm582 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.95 in (76 × 75 mm)0.84 mm872 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.93 in (102 × 100 mm)1.1 mm1,163 mm4Vinyl, card and thin sheet
6 × 5.89 in (152 × 150 mm)1.7 mm1,745 mm2Vinyl, card and thin sheet
8 × 7.86 in (203 × 200 mm)2.2 mm2,327 mm1Vinyl, card and thin sheet
12 × 11.78 in (305 × 299 mm)3.4 mm3,490 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Just Married SVG files

← Just Married in script and capitals All 13 Just Married designs Just Married outline lettering →