Layered jungle in three greens SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three layers that share one bottom edge: pale palms and rainforest trees at the back, mid-green banana leaves, fronds and a fan palm in front of them, and dark monstera leaves nearest. Stack them with the corners lined up.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.15 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 26: 3 outer edges and 23 cut-outs |
| Cut length | 2,650 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 503 curve and line segments |
| Layers | 3: far trees, middle leaves and near leaves |
Measured from the file. PNG: 2,000 × 1,615 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.61 mm | 673 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.6 in (51 × 41 mm) | 1.2 mm | 1,346 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.4 in (76 × 61 mm) | 1.8 mm | 2,019 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.2 in (102 × 81 mm) | 2.4 mm | 2,692 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.8 in (152 × 122 mm) | 3.7 mm | 4,039 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.4 in (203 × 163 mm) | 4.9 mm | 5,385 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.6 in (305 × 244 mm) | 7.3 mm | 8,077 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More jungle SVG files
-
Jungle leaves: fan palm, monstera and banana Solid · 3 pieces -
Jungle spray of five tropical leaves Solid · one piece -
Toucan on a jungle branch Solid · one piece -
Jungle vine with hanging strands Solid · one piece -
Jungle treeline of palms and vines Solid · one piece -
Jungle leaf border Solid · one piece -
Jungle frame of leaves Solid · one piece -
Jungle monogram ring of leaves Solid · one piece
← Jungle leaves outline All 13 jungle designs Jungle leaves: fan palm, monstera and banana →