Free jungle SVG

Jungle leaf border SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Jungle leaf border, as a solid black shape
Jungle leaf border. The preview is the SVG file itself.

Five leaves standing in a row on a round-ended bar: a frond at each end, a monstera next to each and a fan palm in the middle. The left half mirrors the right, so two copies join end to end.

What is in the file

Size100 × 32 mm (3.94 × 1.24 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length902 mm at this size
Narrowest part2 mm at this size
Nodes251 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 685 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.51 mm229 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.63 in (51 × 16 mm)1 mm458 mm70Vinyl, card and thin sheet
3 × 0.95 in (76 × 24 mm)1.5 mm687 mm30Vinyl, card and thin sheet
4 × 1.26 in (102 × 32 mm)2 mm916 mm16Vinyl, card and thin sheet
6 × 1.9 in (152 × 48 mm)3 mm1,375 mm5Any material, including 3 mm wood and acrylic
8 × 2.53 in (203 × 64 mm)4.1 mm1,833 mm4Any material, including 3 mm wood and acrylic
12 × 3.79 in (305 × 96 mm)6.1 mm2,749 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More jungle SVG files

← Jungle treeline of palms and vines All 13 jungle designs Jungle frame of leaves →