Free It’s My Birthday SVG

It’s My Birthday outline lettering SVG

It’s My Birthday outline lettering, drawn as a line
It’s My Birthday outline lettering. The preview is the SVG file itself.

“It’s My Birthday” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 51 mm (3.94 × 2 in), scales to any size
Pieces16 separate pieces
Outlines to cut37: 16 outer edges and 21 cut-outs
Cut length1,505 mm at this size
Narrowest part0.9 mm at this size
Nodes452 curve and line segments

Measured from the file. PNG: 2,000 × 1,056 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.23 mm382 mm170Too fine for most machines
2 × 1.02 in (51 × 26 mm)0.46 mm765 mm50Too fine for most machines
3 × 1.53 in (76 × 39 mm)0.69 mm1,147 mm21Fine detail: vinyl and paper only, weed with care
4 × 2.04 in (102 × 52 mm)0.91 mm1,529 mm10Fine detail: vinyl and paper only, weed with care
6 × 3.05 in (152 × 78 mm)1.4 mm2,294 mm3Vinyl, card and thin sheet
8 × 4.07 in (203 × 103 mm)1.8 mm3,058 mm2Vinyl, card and thin sheet
12 × 6.11 in (305 × 155 mm)2.7 mm4,587 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More It’s My Birthday SVG files

← It’s My Birthday with stars All 12 It’s My Birthday designs It’s My Birthday stencil plate →