Free It’s My Birthday SVG

It’s My Birthday with a drop shadow SVG

It’s My Birthday with a drop shadow, in layered colours
It’s My Birthday with a drop shadow. The preview is the SVG file itself.

“It’s My Birthday” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 78 mm (3.94 × 3.05 in), scales to any size
Pieces12 separate pieces
Outlines to cut29: 12 outer edges and 17 cut-outs
Cut length2,088 mm at this size
Narrowest part1.7 mm at this size
Nodes810 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,567 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)0.43 mm530 mm120Too fine for most machines
2 × 1.55 in (51 × 39 mm)0.86 mm1,061 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.32 in (76 × 59 mm)1.3 mm1,591 mm12Vinyl, card and thin sheet
4 × 3.1 in (102 × 79 mm)1.7 mm2,121 mm6Vinyl, card and thin sheet
6 × 4.65 in (152 × 118 mm)2.6 mm3,182 mm2Vinyl, card and thin sheet
8 × 6.2 in (203 × 157 mm)3.5 mm4,243 mm1Any material, including 3 mm wood and acrylic
12 × 9.3 in (305 × 236 mm)5.2 mm6,364 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More It’s My Birthday SVG files

← It’s My Birthday stencil plate All 12 It’s My Birthday designs It’s My Birthday in Pacifico →