Free It’s My Birthday SVG

It’s My Birthday in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

It’s My Birthday in Lilita One, as a solid black shape
It’s My Birthday in Lilita One. The preview is the SVG file itself.

“It’s My Birthday” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 54 mm (3.94 × 2.12 in), scales to any size
Pieces15 separate pieces
Outlines to cut19: 15 outer edges and 4 cut-outs
Cut length906 mm at this size
Narrowest part2.8 mm at this size
Nodes268 curve and line segments

Measured from the file. PNG: 2,000 × 1,112 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)0.71 mm230 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.08 in (51 × 27 mm)1.4 mm460 mm45Vinyl, card and thin sheet
3 × 1.61 in (76 × 41 mm)2.1 mm690 mm18Vinyl, card and thin sheet
4 × 2.15 in (102 × 55 mm)2.8 mm920 mm10Vinyl, card and thin sheet
6 × 3.23 in (152 × 82 mm)4.3 mm1,381 mm3Any material, including 3 mm wood and acrylic
8 × 4.3 in (203 × 109 mm)5.7 mm1,841 mm2Any material, including 3 mm wood and acrylic
12 × 6.46 in (305 × 164 mm)8.5 mm2,761 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More It’s My Birthday SVG files

← It’s My Birthday in Kaushan Script All 13 It’s My Birthday designs It’s My Birthday in Alfa Slab One →