Free In Loving Memory SVG

In Loving Memory in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

In Loving Memory in Pacifico, as a solid black shape
In Loving Memory in Pacifico. The preview is the SVG file itself.

“In Loving Memory” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 70 mm (3.94 × 2.74 in), scales to any size
Pieces5 separate pieces
Outlines to cut11: 5 outer edges and 6 cut-outs
Cut length1,026 mm at this size
Narrowest part1.5 mm at this size
Nodes399 curve and line segments

Measured from the file. PNG: 2,000 × 1,415 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.38 mm261 mm130Too fine for most machines
2 × 1.39 in (51 × 35 mm)0.76 mm521 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.09 in (76 × 53 mm)1.1 mm782 mm15Vinyl, card and thin sheet
4 × 2.78 in (102 × 71 mm)1.5 mm1,042 mm8Vinyl, card and thin sheet
6 × 4.18 in (152 × 106 mm)2.3 mm1,564 mm2Vinyl, card and thin sheet
8 × 5.57 in (203 × 141 mm)3 mm2,085 mm2Any material, including 3 mm wood and acrylic
12 × 8.35 in (305 × 212 mm)4.6 mm3,127 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In Loving Memory SVG files

← In Loving Memory with a pair of wings All 13 In Loving Memory designs In Loving Memory in Lobster →