Free In Loving Memory SVG

In Loving Memory in Alfa Slab One SVG

In Loving Memory in Alfa Slab One, as a solid black shape
In Loving Memory in Alfa Slab One. The preview is the SVG file itself.

“In Loving Memory” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 44 mm (3.94 × 1.73 in), scales to any size
Pieces15 separate pieces
Outlines to cut19: 15 outer edges and 4 cut-outs
Cut length934 mm at this size
Narrowest part1.9 mm at this size
Nodes477 curve and line segments

Measured from the file. PNG: 2,000 × 921 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.48 mm237 mm190Too fine for most machines
2 × 0.88 in (51 × 22 mm)0.97 mm474 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.32 in (76 × 33 mm)1.4 mm712 mm24Vinyl, card and thin sheet
4 × 1.76 in (102 × 45 mm)1.9 mm949 mm12Vinyl, card and thin sheet
6 × 2.63 in (152 × 67 mm)2.9 mm1,423 mm4Vinyl, card and thin sheet
8 × 3.51 in (203 × 89 mm)3.9 mm1,898 mm3Any material, including 3 mm wood and acrylic
12 × 5.27 in (305 × 134 mm)5.8 mm2,847 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In Loving Memory SVG files

← In Loving Memory in Lilita One All 12 In Loving Memory designs In Loving Memory in Amatic SC →