Free In Loving Memory SVG

In Loving Memory in Amatic SC SVG

In Loving Memory in Amatic SC, as a solid black shape
In Loving Memory in Amatic SC. The preview is the SVG file itself.

“In Loving Memory” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 71 mm (3.94 × 2.8 in), scales to any size
Pieces14 separate pieces
Outlines to cut17: 14 outer edges and 3 cut-outs
Cut length1,508 mm at this size
Narrowest part1.8 mm at this size
Nodes546 curve and line segments

Measured from the file. PNG: 2,000 × 1,442 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.46 mm383 mm130Too fine for most machines
2 × 1.42 in (51 × 36 mm)0.91 mm766 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.13 in (76 × 54 mm)1.4 mm1,149 mm15Vinyl, card and thin sheet
4 × 2.84 in (102 × 72 mm)1.8 mm1,532 mm8Vinyl, card and thin sheet
6 × 4.26 in (152 × 108 mm)2.7 mm2,298 mm2Vinyl, card and thin sheet
8 × 5.68 in (203 × 144 mm)3.7 mm3,064 mm2Any material, including 3 mm wood and acrylic
12 × 8.52 in (305 × 216 mm)5.5 mm4,596 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In Loving Memory SVG files

← In Loving Memory in Alfa Slab One All 12 In Loving Memory designs In Loving Memory in block capitals →