Free In God We Trust SVG

In God We Trust stencil plate SVG

In God We Trust stencil plate, as a solid black shape — In God We Trust stencil plate. The preview is the SVG file itself.

A rounded plate with “IN GOD WE TRUST” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.58 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	1,307 mm at this size
Narrowest part	1.7 mm at this size
Nodes	263 curve and line segments

Measured from the file. PNG: 2,000 × 1,338 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.43 mm	332 mm	140	Too fine for most machines
2 × 1.31 in (51 × 33 mm)	0.86 mm	664 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.97 in (76 × 50 mm)	1.3 mm	996 mm	15	Vinyl, card and thin sheet
4 × 2.62 in (102 × 67 mm)	1.7 mm	1,328 mm	8	Vinyl, card and thin sheet
6 × 3.94 in (152 × 100 mm)	2.6 mm	1,992 mm	2	Vinyl, card and thin sheet
8 × 5.25 in (203 × 133 mm)	3.5 mm	2,656 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.87 in (305 × 200 mm)	5.2 mm	3,984 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In God We Trust SVG files

← In God We Trust outline lettering All 12 In God We Trust designs In God We Trust with a drop shadow →