Free In God We Trust SVG

In God We Trust outline lettering SVG

In God We Trust outline lettering, drawn as a line
In God We Trust outline lettering. The preview is the SVG file itself.

“In God We Trust” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 45 mm (3.94 × 1.77 in), scales to any size
Pieces14 separate pieces
Outlines to cut31: 14 outer edges and 17 cut-outs
Cut length1,339 mm at this size
Narrowest part1.4 mm at this size
Nodes401 curve and line segments

Measured from the file. PNG: 2,000 × 940 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 11 mm)0.36 mm340 mm180Too fine for most machines
2 × 0.9 in (51 × 23 mm)0.71 mm680 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.35 in (76 × 34 mm)1.1 mm1,020 mm21Vinyl, card and thin sheet
4 × 1.8 in (102 × 46 mm)1.4 mm1,360 mm12Vinyl, card and thin sheet
6 × 2.69 in (152 × 68 mm)2.1 mm2,041 mm4Vinyl, card and thin sheet
8 × 3.59 in (203 × 91 mm)2.8 mm2,721 mm3Vinyl, card and thin sheet
12 × 5.39 in (305 × 137 mm)4.3 mm4,081 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In God We Trust SVG files

← In God We Trust with stars All 12 In God We Trust designs In God We Trust stencil plate →