Free If You Can Read This You’re Too Close SVG

You’re Too Close in script and capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

You’re Too Close in script and capitals. The preview is the SVG file itself.

“If You Can” in Pacifico script over “READ THIS YOU’RE TOO CLOSE” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

What is in the file

Size	100 × 77 mm (3.94 × 3.02 in), scales to any size
Pieces	26 separate pieces
Outlines to cut	38: 26 outer edges and 12 cut-outs
Cut length	1,961 mm at this size
Narrowest part	1.4 mm at this size
Nodes	500 curve and line segments

Measured from the file. PNG: 2,000 × 1,552 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.77 in (25 × 19 mm)	0.36 mm	498 mm	120	Too fine for most machines
2 × 1.53 in (51 × 39 mm)	0.71 mm	996 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.3 in (76 × 58 mm)	1.1 mm	1,494 mm	12	Vinyl, card and thin sheet
4 × 3.07 in (102 × 78 mm)	1.4 mm	1,992 mm	6	Vinyl, card and thin sheet
6 × 4.6 in (152 × 117 mm)	2.1 mm	2,989 mm	2	Vinyl, card and thin sheet
8 × 6.14 in (203 × 156 mm)	2.8 mm	3,985 mm	1	Vinyl, card and thin sheet
12 × 9.2 in (305 × 234 mm)	4.3 mm	5,977 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

What is in the file

Will it cut at your size?

More If You Can Read This You’re Too Close SVG files