Free If You Can Read This You’re Too Close SVG

You’re Too Close with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

You’re Too Close with stars. The preview is the SVG file itself.

“If You Can Read This You’re Too Close” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size	100 × 89 mm (3.94 × 3.51 in), scales to any size
Pieces	23 separate pieces
Outlines to cut	37: 23 outer edges and 14 cut-outs
Cut length	1,504 mm at this size
Narrowest part	0.8 mm at this size
Nodes	810 curve and line segments

Measured from the file. PNG: 2,000 × 1,790 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.89 in (25 × 23 mm)	0.2 mm	382 mm	110	Too fine for most machines
2 × 1.78 in (51 × 45 mm)	0.41 mm	764 mm	30	Too fine for most machines
3 × 2.67 in (76 × 68 mm)	0.61 mm	1,146 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.56 in (102 × 91 mm)	0.81 mm	1,528 mm	6	Fine detail: vinyl and paper only, weed with care
6 × 5.35 in (152 × 136 mm)	1.2 mm	2,292 mm	2	Vinyl, card and thin sheet
8 × 7.13 in (203 × 181 mm)	1.6 mm	3,056 mm	1	Vinyl, card and thin sheet
12 × 10.69 in (305 × 272 mm)	2.4 mm	4,584 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

What is in the file

Will it cut at your size?

More If You Can Read This You’re Too Close SVG files