Free If You Can Read This You’re Too Close SVG

You’re Too Close in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

You’re Too Close in Lilita One. The preview is the SVG file itself.

“If You Can Read This You’re Too Close” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size	100 × 42 mm (3.94 × 1.63 in), scales to any size
Pieces	31 separate pieces
Outlines to cut	43: 31 outer edges and 12 cut-outs
Cut length	973 mm at this size
Narrowest part	1.8 mm at this size
Nodes	506 curve and line segments

Measured from the file. PNG: 2,000 × 875 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.42 in (25 × 11 mm)	0.46 mm	247 mm	190	Too fine for most machines
2 × 0.83 in (51 × 21 mm)	0.91 mm	494 mm	55	Fine detail: vinyl and paper only, weed with care
3 × 1.24 in (76 × 32 mm)	1.4 mm	741 mm	24	Vinyl, card and thin sheet
4 × 1.66 in (102 × 42 mm)	1.8 mm	989 mm	12	Vinyl, card and thin sheet
6 × 2.49 in (152 × 63 mm)	2.7 mm	1,483 mm	4	Vinyl, card and thin sheet
8 × 3.32 in (203 × 84 mm)	3.7 mm	1,977 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.98 in (305 × 126 mm)	5.5 mm	2,966 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

What is in the file

Will it cut at your size?

More If You Can Read This You’re Too Close SVG files