Free I Said Yes SVG

I Said Yes in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Said Yes in Alfa Slab One, as a solid black shape
I Said Yes in Alfa Slab One. The preview is the SVG file itself.

“I Said Yes” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 68 mm (3.94 × 2.66 in), scales to any size
Pieces9 separate pieces
Outlines to cut12: 9 outer edges and 3 cut-outs
Cut length832 mm at this size
Narrowest part3.4 mm at this size
Nodes294 curve and line segments

Measured from the file. PNG: 2,000 × 1,375 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.68 in (25 × 17 mm)0.86 mm211 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.35 in (51 × 34 mm)1.7 mm423 mm35Vinyl, card and thin sheet
3 × 2.03 in (76 × 51 mm)2.6 mm634 mm15Vinyl, card and thin sheet
4 × 2.7 in (102 × 69 mm)3.5 mm845 mm8Any material, including 3 mm wood and acrylic
6 × 4.05 in (152 × 103 mm)5.2 mm1,268 mm2Any material, including 3 mm wood and acrylic
8 × 5.4 in (203 × 137 mm)6.9 mm1,691 mm2Any material, including 3 mm wood and acrylic
12 × 8.1 in (305 × 206 mm)10 mm2,536 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Said Yes SVG files

← I Said Yes in Lilita One All 12 I Said Yes designs I Said Yes in Amatic SC →