Free I Said Yes SVG

I Said Yes in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Said Yes in Amatic SC, as a solid black shape
I Said Yes in Amatic SC. The preview is the SVG file itself.

“I Said Yes” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut10: 8 outer edges and 2 cut-outs
Cut length937 mm at this size
Narrowest part2.5 mm at this size
Nodes266 curve and line segments

Measured from the file. PNG: 1,679 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.64 mm238 mm110Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)1.3 mm476 mm30Vinyl, card and thin sheet
2.5 × 3 in (63 × 76 mm)1.9 mm714 mm12Vinyl, card and thin sheet
3.33 × 4 in (85 × 102 mm)2.5 mm952 mm6Vinyl, card and thin sheet
5 × 6 in (127 × 152 mm)3.8 mm1,428 mm2Any material, including 3 mm wood and acrylic
6.66 × 8 in (169 × 203 mm)5.1 mm1,904 mm1Any material, including 3 mm wood and acrylic
10 × 12 in (254 × 305 mm)7.6 mm2,856 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Said Yes SVG files

← I Said Yes in Alfa Slab One All 13 I Said Yes designs I Said Yes in block capitals →