Free I Said Yes SVG

I Said Yes in script and capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Said Yes in script and capitals, as a solid black shape
I Said Yes in script and capitals. The preview is the SVG file itself.

“I Said” in Pacifico script over “YES” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

What is in the file

Size94 × 100 mm (3.7 × 3.94 in), scales to any size
Pieces7 separate pieces
Outlines to cut10: 7 outer edges and 3 cut-outs
Cut length1,203 mm at this size
Narrowest part2.3 mm at this size
Nodes193 curve and line segments

Measured from the file. PNG: 1,887 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.58 mm306 mm100Fine detail: vinyl and paper only, weed with care
1.88 × 2 in (48 × 51 mm)1.2 mm611 mm25Vinyl, card and thin sheet
2.82 × 3 in (72 × 76 mm)1.8 mm917 mm12Vinyl, card and thin sheet
3.76 × 4 in (96 × 102 mm)2.3 mm1,222 mm6Vinyl, card and thin sheet
5.65 × 6 in (143 × 152 mm)3.5 mm1,833 mm2Any material, including 3 mm wood and acrylic
7.53 × 8 in (191 × 203 mm)4.7 mm2,444 mm1Any material, including 3 mm wood and acrylic
11.29 × 12 in (287 × 305 mm)7 mm3,667 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Said Yes SVG files

← I Said Yes in block capitals All 12 I Said Yes designs I Said Yes with hearts →