Free I Love You SVG

I Love You stencil plate SVG

I Love You stencil plate, as a solid black shape — I Love You stencil plate. The preview is the SVG file itself.

A rounded plate with “I LOVE YOU” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 96 mm (3.94 × 3.79 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,399 mm at this size
Narrowest part	1.7 mm at this size
Nodes	101 curve and line segments

Measured from the file. PNG: 2,000 × 1,929 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.96 in (25 × 24 mm)	0.43 mm	355 mm	100	Too fine for most machines
2 × 1.93 in (51 × 49 mm)	0.86 mm	711 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.89 in (76 × 73 mm)	1.3 mm	1,066 mm	9	Vinyl, card and thin sheet
4 × 3.85 in (102 × 98 mm)	1.7 mm	1,421 mm	6	Vinyl, card and thin sheet
6 × 5.78 in (152 × 147 mm)	2.6 mm	2,132 mm	2	Vinyl, card and thin sheet
8 × 7.7 in (203 × 196 mm)	3.5 mm	2,843 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.56 in (305 × 294 mm)	5.2 mm	4,264 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Love You SVG files

← I Love You outline lettering All 12 I Love You designs I Love You with a drop shadow →